✈️ What countries do you deliver to?

We'd like to bring to your attention that our delivery destinations are not limited by the USA and Canada only. The parcels are shipped daily to our clients in Australia, New Zealand, UK, and other locations.

❓️ How do we calculate shipping costs?

Packages are shipped through the best available method, depending on the product and destination. Shipping costs will be calculated accordingly and added to your shopping cart. To get your shipping cost calculated, simply add products to the shopping cart and enter your postal code. Freight Carrier may be required for large or heavy items. Freight Carrier delivery does not include carrying the package into the building or unpacking. Lift-gate service is available for an additional charge which is automatically included in your shipping quote.

➡️ How fast are the orders shipped?

Products are usually shipped within 24 hours of order placement (on business days) from our warehouses in Canada and the US.

✅️ How do I get the status of my order?

After payment has been made for your purchase, you will receive an email within 24 business hours from our Sales staff with a tracking number. Majority of our carriers have online tracking available.

Fittings & Connectors

Featured Products

90 degree Tail Piece - 3/8"

MSRP:

Was:

Now: $6.40 6.4

You save: CAD $0.00
Coupler Shutoff Valve, SS

MSRP:

Was:

Now: $29.72 29.72

You save: CAD $0.00
Beverage System Part - Swivel Set - 1/4" ffl Nut and 3/8" Barb - 10 Pieces

MSRP:

Was:

Now: $64.40 64.4

You save: CAD $0.00
John Guest Fitting - Gray Acetal Union Tee 1/2"

MSRP:

Was:

Now: $8.62 8.62

You save: CAD $0.00
John Guest Fitting - 3/8"OD Stem to 1/2" OD Tube Enlarger

MSRP:

Was:

Now: $5.46 5.46

You save: CAD $0.00
John Guest Fitting - Gray Acetal Union Reducer - 1/2"x 3/8"

MSRP:

Was:

Now: $7.42 7.42

You save: CAD $0.00
John Guest type Fitting - 1/4" Superseal x 1/4" ID Barb

MSRP:

Was:

Now: $4.00 4

You save: CAD $0.00
CPC Quick Disconnect, 3/8" Socket

MSRP:

Was:

Now: $17.16 17.16

You save: CAD $0.00
5/16" Elbow Hose Splicer - 10 Pieces

MSRP:

Was:

Now: $26.80 26.8

You save: CAD $0.00
3/8" Hose U-Bend - 10 Pieces

MSRP:

Was:

Now: $25.00 25

You save: CAD $0.00
5/16" x 5/16 " Hose Splicer - 10 Pieces

MSRP:

Was:

Now: $17.50 17.5

You save: CAD $0.00
3/8" Elbow Hose Splicer - 10 Pieces

MSRP:

Was:

Now: $17.40 17.4

You save: CAD $0.00
3/8" Hose U-Bend Large Radius - 10 Pieces

MSRP:

Was:

Now: $24.40 24.4

You save: CAD $0.00
5/16" Hose Barb for Beer Nut - 10 Pieces

MSRP:

Was:

Now: $26.80 26.8

You save: CAD $0.00
Original Oetiker Stepless Clamp 17.0 - 100 Pieces

MSRP:

Was:

Now: $27.00 27

You save: CAD $0.00
Gray Acetal Reducing Bulkhead Union, 3/8"

MSRP:

Was:

Now: $8.27 8.27

You save: CAD $0.00
SS Wall Bracket with 3/8" Barb

MSRP:

Was:

Now: $13.52 13.52

You save: CAD $0.00
3/8" Hose Plug - 10 Pieces

MSRP:

Was:

Now: $15.00 15

You save: CAD $0.00
1/4" Hose Plug - 10 Pieces

MSRP:

Was:

Now: $7.50 7.5

You save: CAD $0.00
Beer/Hex Nut Washer - 10 Pieces

MSRP:

Was:

Now: $2.50 2.5

You save: CAD $0.00
Original Oetiker Stepless Clamp 11.3 - 100 Pieces

MSRP:

Was:

Now: $27.00 27

You save: CAD $0.00
Cornelius Keg Coupler - Ball Lock - Liquid Quick Disconnect - 1/4" Flare

MSRP:

Was:

Now: $7.33 7.33

You save: CAD $0.00

Welcome to the department of beer line fittings and beer tap connectors – those tiny little beer system parts whose job is to keep your draft beer system together, securely connecting all of its elements and ensuring a constant, unhindered flow of beer without any leaks.

Beverage Craft offers a wide variety of beer tap fittings guaranteed to fit your draft beer setup just right. Everything from 90-degree tailpieces to Y-fittings, we’ve got it in stock and ready for shipping.

Feel free to browse our selection by clicking on the items you’re interested in for more details, product images, and prices.

Not sure which hose fittings or connectors are right for your draft beer dispensing system? Let Beverage Craft specialists step in and help you make the right choice. Contact our team via live chat, email, or phone – we’ll be there in an instant to provide you with a professional consultation and assistance.

Understanding Parts of a Draft Beer System

Understanding which beer lines and fittings you might need requires a bit of knowledge about the draft beer system in general – what components it consists of, how they are connected, and how it all works together.

A typical draft beer system would include the following elements:

Gas tank (CO2 or nitrogen can be used depending on the type of the beer)
Gas regulator (ideally, both primary and secondary gas regulators are required)
Air line (a food-grade PVC tube)
Keg
Keg coupler
Beer line (a food-grade PVC tube that typically runs for about 5 feet for direct-draw beer systems)
Shank (a small metal tube that anchors your draft beer tower faucet solidly to the refrigerator wall or draft beer tower)
Faucet
Draft beer tower
Tap handle
Beer line connectors

Keg Connection Essentials: From Hoses to Connectors

Here are the points where the elements of a draft beer system connect to each other and where you might require keg connectors and kegerator fittings:

CO2 tank – CO2 regulator connection
CO2 regulator – air line connection
Air line – keg coupler connection
Beer line – keg coupler connection
Beer line – shank connection
Shank – faucet connection

Depending on your particular draft beer dispensing setup, you may need a different type of keg connector fittings. In case of kegerator beer line replacement, a keg hose connector is also required.

Beer Pipe Fittings

Beer pipe fittings (also known as keg fittings) connect the dispensing equipment to the kegs, ensuring proper flow, sealing, and connection integrity between the keg and beer lines. The two arguably most important fittings are tail pieces and connectors.

Tail pieces are used to connect the trunk line to the faucet or shank. They usually have a barb or threaded end, allowing for a secure connection.

Connector join sections of a beer line together, allowing for easy installation and disassembly. They are available in various sizes and types, such as barbed, push-fit, or threaded connectors.

Gas Line Fittings

Beer gas line fittings are used to connect the gas supply, typically CO2 or nitrogen (N2), to the keg in order to maintain the proper pressure required for dispensing beer. CO2 quick connect fittings are used for Cornelius kegs.

Gas line fittings should be properly sized, compatible with the gas supply, and regularly inspected for wear and tear to maintain the integrity and safety of the beer dispensing system.

Where to Buy Beer Line Fittings and Connectors in the US and Canada

We offer a wide variety of draft beer hose fittings and connectors that go with them, including the following items:

John Guest fittings
Tail pieces
Coil fittings
Crosses
Beer line quick disconnect
Elbow splicers
Hose plugs
Hose splicers
Worm and stepless clamps
T-fittings
U-bends
Wall brackets
Y-fittings
Assorted beer fittings and connectors for various types of connections

If you are looking for for the best beer line tubing or a particular type of fittings and haven’t found it on our website, please write to us at sales@beveragecraft.com to inquire about availability. We have new arrivals every week and are always here to help.

Browse by & Hide Filters Show Filters

90 degree Tail Piece - 3/8"

Coupler Shutoff Valve, SS

Beverage System Part - Swivel Set - 1/4" ffl Nut and 3/8" Barb - 10 Pieces

John Guest Fitting - Gray Acetal Union Tee 1/2"

John Guest Fitting - 3/8"OD Stem to 1/2" OD Tube Enlarger

John Guest Fitting - Gray Acetal Union Reducer - 1/2"x 3/8"

John Guest type Fitting - 1/4" Superseal x 1/4" ID Barb

CPC Quick Disconnect, 3/8" Socket

5/16" Elbow Hose Splicer - 10 Pieces

3/8" Hose U-Bend - 10 Pieces

5/16" x 5/16 " Hose Splicer - 10 Pieces

3/8" Elbow Hose Splicer - 10 Pieces

3/8" Hose U-Bend Large Radius - 10 Pieces

5/16" Hose Barb for Beer Nut - 10 Pieces

Original Oetiker Stepless Clamp 17.0 - 100 Pieces

Gray Acetal Reducing Bulkhead Union, 3/8"

SS Wall Bracket with 3/8" Barb

3/8" Hose Plug - 10 Pieces

1/4" Hose Plug - 10 Pieces

Beer/Hex Nut Washer - 10 Pieces

Original Oetiker Stepless Clamp 11.3 - 100 Pieces

Cornelius Keg Coupler - Ball Lock - Liquid Quick Disconnect - 1/4" Flare

Customer Service

Returns & Refunds

Shipping & Order Status

Wholesale Inquiries